How to set or randomise multiple parameters

By July 4, 2016

 Setting and randomising object positions

MissionControl-massEdit-02

Please click to view full-size

In this clip you will find a demonstration of how to set multiple object parameters, in this case the z-position, to an absolute value, or an absolute or relative random value within a defined range.
  1. Open the parameter selector.
  2. Change to “Node Property” mode.
  3. Select the “Position” property.
  4. Open the utility panel by left-clicking on the status bar at the bottom of the Mission Control window.
  5. Select the cells of the property you wish to edit.
  6. Apply various operations on the selected values. Choose min and max values to randomise in either relative or absolute mode.
  7. To set all cells to a single parameter, enter a value in the “Abs.” field and hit “Apply”

 Setting and randomising object wire colours

MissionControl-massEdit-02

Please click to view full-size.

 Setting and randomising VRayColor texturemap colours

Please click to view full-size.

Please click to view full-size.

Skip to toolbar